Sword Page
(broadswords, katanas, rapiers)
(I don't often make sheaths but when I do I feature them here with their swords)


Project#93:
Noel's Sword "Flame Fossil" (Final Fantasy XIII-2)
This is the photo I used as a guide

Details ~n~ stuff
Size: 3 feet 6 inches in length, 1 foot 3 inches in width ~ 2nd sword - 2 feet 3 inches in length
Status: Completed
Degree of difficulty: 4
Durability rating: 2
Dates made: 03/03/2014 - 06/14/2014
Total time: 50hrs 05mins
Total cost: $51.58
Whole View
The whole sword

Blade View Handle View
A close up of the flames/blade and the grip

Whole View Close View
The smaller sword and a close up of the detail


Project#78:
Jecht's Sword (Final Fantasy X)
~~~ Project has a removable part: The handle separates from the blade ~~~
This is the image I used as a guide
(I was told this image was from a different game cause of the graphics, I know, but the sword looks the same as the artbook picture I have, and this image is better here)

Details ~n~ stuff
Size: 4 feet 1 inch in length (a little shorter than I wanted but it works)
Status: Completed
Degree of difficulty: 3
Durability rating: 2
Dates made: 03/29/2013 - 05/04/2013
Total time: 27hrs 50mins
Total cost: $64.60
Whole view Handle view
Whole view + a close up of the handle.
Blade view Handle view
Close up of the decals and the blade tip, you can sorta see the shading it gets lighter.


Project#77:
Grecian Xiphos (Unknown)
~ This picture was found online via an image search therefor I do not claim any rights to the guide image, it was NOT my own artwork ~
~ It was also requested to be unpainted so this unpainted image is the complete sword ~
This is the photo I used as a guide

Details ~n~ stuff
Size: 2 feet in length
Status: Completed
Degree of difficulty: 2
Durability rating: 2
Dates made: 02/23/2013 - 03/29/2013
Total time: 5hrs 45mins
Total cost: $14.97
Whole View
The whole sword
Hilt View
A close up of the hilt.


Project#73a:
The Master Sword (restored) (Legend of Zelda: Wind Waker)
NOTE: Take in mind this project is made for my nephew so the pointed blade and any pointy parts have been rounded so it may not appear just like the picture : )
This is the photo I used as a guide

Details ~n~ stuff
Size: 2 feet in length
Status: Completed
Degree of difficulty: 2
Durability rating: 3
Dates made: 12/22/2012 - 01/18/2013
Total time: 13hrs 15mins
Total cost: $12.47
Whole View
Hilt View
The whole sword + a close up of the hilt. I don't imagine it will look this good ever again once I give it to Tom >.>


Project#73b:
The Master Sword (sheath) (Legend of Zelda: Wind Waker)
NOTE: This project was also made for my nephew so instead of doing difficult raised detailing I simply painted on the design since I know it's going to be roughly handled. This is also the only image I could find so it may not be exactly alike as far as detail goes
This is the photo I used as a guide

Details ~n~ stuff
Size: 1 foot 3 inches in length
Status: Completed
Degree of difficulty: 2
Durability rating: 2
Dates made: 01/20/2013 - 03/10/2013
Total time: 6hrs 15mins
Total cost: $10.98
Whole View Back View Front View
The whole sheath, front, back and a view of the top. I left a hole across the back and attached a piece of wood across it to HOPEFULLY hold up against being put on a belt... we shall see.


Project#70:
Tidus' Sword (Final Fantasy X)
(Made for Otakon 2013)
This is the photo I used as a guide

Details ~n~ stuff
Size: 4 feet 5 inches
Status: Completed
Degree of difficulty: 3
Durability rating: 1
Dates made: 10/20/2012 - 12/15/2012
Total time: 17hrs 15mins
Total cost: $31.80
Whole View
The whole sword
Detail View Blade View
A close up of the detail on the blade/close up of the end of the blade and the paint shading
Handle View
Close up of the grip


Project#69:
Auron's Katana (Final Fantasy X)
(Made for Otakon 2013)
~~~ Project has a removable part: The handle separates from the blade ~~~
This is the photo I used as a guide

Details ~n~ stuff
Size: 4 feet 10 inches
Status: Completed
Degree of difficulty: 3
Durability rating: 2
Dates made: 10/01/2012 - 11/27/2012
Total time: 23hrs 35mins
Total cost: $24.99
Whole View
The whole sword (tried a different way to make this that didn't work out, which is why the curve in the blade's body isn't as prominent as it should be)

Close View Blade View Hilt View
Close up of the flames, blade, and hilt (There is a string/chain at the end which was added later, but these were the pictures that came out the best)

Whole View Whole View
2nd composite sword, the hilt detaches from blade via the dowel. Second pic the addition of the tassel on the end


Project#68:
Heihachi's Katana (Samurai 7)
~ Special thanks to Candice Hagman for making the little ghost charm at the end of the sword ~
http://buttonwho.deviantart.com/
http://www.etsy.com/shop/buttonwho
This is the photo I used as a guide

Details ~n~ stuff
Size: 3 feet 4 inches
Status: Completed
Degree of difficulty: 2
Durability rating: 2
Dates made: 09/14/2012 - 09/30/2012
Total time: 11hrs 15mins
Total cost: $13.47
Whole View
The whole sword

Handle View Handle View
A close up of the handle and detailed part of the blade

Handle View Handle View
A close up of the end of the sword/update: a picture of the charm at the end


Project#61:
Ryuu's "Dragon Fang Sword" (RG Veda)
~~~ First project that can be separated for packing/storage!: The hilt separates from the blade ~~~
This is the photo I used as a guide

Details ~n~ stuff
Size: 4 feet 22 inches
Status: Completed
Degree of difficulty: 4
Durability rating: 2 (note: it comes apart)
Dates made: 03/08/2012 - 08/28/2012
Total time: 32hrs
Total cost: $34.58
Whole view
The whole sword

Close view Close view
A close up of the handle and end

Whole view
How it comes apart! It stays together tight, so far so good


Project#59:
Zack's Sword (Final Fantasy VII)
(made for Otakon 2011)
This is the photo I used as a guide

Details ~n~ stuff
Size: 5 feet in length
Status: Completed
Degree of difficulty: 4
Durability rating: 2
Dates made: 04/17/2011 - 07/01/2011
Total time: 29hrs 5mins
Total cost: $58.34
Whole view
The whole sword

Handle view
A close up of the handle.. you can't really see the other detailing on the blade because it's too dark.


Project#48:
"Frostmourne" The Lich King's Sword (World of Warcraft: WotLK)
This is the photo I used as a guide

Details ~n~ stuff
Size: ~ On hold ~
Status: ~ On hold ~
Degree of difficulty:
Durability rating:
Dates made: 11/24/09 - (On 04/13/2010 it was postponed for conventions)
Total time:
Total cost: $



Project#44:
Anubis' Katana (Ronin Warriors)
This is the photo I used as a guide

Details ~n~ stuff
Size: 4 feet in length
Status: Completed
Degree of difficulty: 3
Durability rating: 2
Dates made: 02/23/09 - 10/26/09
Total time: 11hrs 15mins
Total cost: $12.96
Whole View
The whole sword (approved by the itteh bitteh kitteh committeh of one >.> )

Hilt View
A close up of the hilt


Project#32:
Hikaru's Sword (Magic Knight Rayearth)
This is the photo I used as a guide

Details ~n~ stuff
Size: 5 feet in height
Status: Completed
Degree of difficulty: 3
Durability rating: 2
Dates made: 09/29/08 - 11/19/08
Total time: 28hrs
Total cost: $34.27
Whole View
The whole sword


Project#31:
Fuu's Sword (Magic Knight Rayearth)
This is the photo I used as a guide

Details ~n~ stuff
Size: 6 feet 4 inches in height
Status: Completed
Degree of difficulty: 3
Durability rating: 2
Dates made: 06/18/08 - 09/27/08
Total time: - not recorded
Total cost: $26.40
Whole View
The whole sword

Hilt View
Close up of the hilt

Pommel View


Project#30:
Umi's Rapier (Magic Knight Rayearth)
This is the photo I used as a guide

Details ~n~ stuff
Size: 3 feet 10 inches in height
Status: Completed
Degree of difficulty: 2
Durability rating: 1
Dates made: 06/13/08 - 06/18/08
Total time: - not recorded -
Total cost: $9.03
Whole View
The whole sword

Hilt View
Close up of the hilt

Crossguard View
Close up of the crossguard


Project#25a:
The Master Sword (The Legend of Zelda: Ocarina of Time)
(Made for Otakon 2010)
This is the photo I used as a guide

Details ~n~ stuff
Size: 3 feet 6.5 inches in height
Status: Completed
Degree of difficulty: 3
Durability rating: 2
Dates made: 02/23/09 - 03/18/09
Total time: 11hrs 25mins
Total cost: $19.34
Whole View
The whole sword

Hilt View Detail View
A close up of the hilt, carving and pommel


Project#25b:
The Master Sword: Sheath (The Legend of Zelda: Ocarina of Time)
(Made for Otakon 2010)
(Refer to above for guide image)

Details ~n~ stuff
Size: 2 feet 8 inches in height
Status: Completed
Degree of difficulty: 4
Durability rating: 1
Dates made: 03/18/09 - 04/27/09
Total time: 9hrs 15mins
Total cost: $9.07
Whole View Whole View
The whole sheath, sword in sheath


Project#21:
Beatrix's Sword (Final Fantasy 9)
This is the photo I used as a guide

Details ~n~ stuff
Size: ~ Future Project ~
Status: ~ Future Project ~
Degree of difficulty:
Durability rating: Dates made:
Total time:
Total cost: $



Project#13:
Dart's Sword (Legend of Dragoon)
This is the photo I used as a guide

Details ~n~ stuff
Size: 3 feet 8.5 inches in height
Status: Completed
Degree of difficulty: 3
Durability rating: 3
Dates made: 01/07/08 - 12/05/08
Total time: - not recorded -
Total cost: $24.93
Whole View
The whole sword

Crossguard View Pommel View
A close up of crossguard and pommel


Project#10:
Demon Sword "Morgif" (Kyo Kara Maoh)
This is the photo I used as a guide

Details ~n~ stuff
Size: 4 feet 2 inches in height
Status: Completed
Degree of difficulty: 2
Durability rating: 2
Dates made: 12/12/07 - 12/21/07
Total time: - not recorded -
Total cost: $17.75
Whole View
The whole sword

Hilt View
Close up of the hilt

Face View
Close up of the face


Project#8:
Kurogane's Katana (Tsubasa)
This is the photo I used as a guide

Details ~n~ stuff
Size: 4 feet 5 inches in length
Status: Completed
Degree of difficulty: 3
Durability rating: 2
Dates made: 10/01/07 - 10/24/07
Total time: - not recorded
Total cost: $19.44
(it was hard to get a good full picture of this one)
Hilt View
A close up of the hilt

Dragon View
A close up of the Dragon's head

Blade View
A picture of the Blade


Project#4:
Arashi's Katana (X)
(Made for Otakon 2007)
This is the photo I used as a guide

Details ~n~ stuff
Size: 3 feet in length
Status: Completed
Degree of difficulty: 2
Durability rating: 2
Dates made: 06/07 - 07/07
Total time: - not recorded -
Total cost: $8.96
Full View
The whole sword.

Handle View
Close up of the handle


Back to Projects Page