Miscellaneous Page
(Weapons that are undefined or don't fit into other categories. Aka 'page WTF' )


Project#97:
Luna P (Sailor Moon)
~~~ Project contains removeable parts: The moon is changeable via a magnet in the head ~~~
This is the photo I used as a guide

Details ~n~ stuff
Size: 1 foot in diameter
Status: Completed
Degree of difficulty: 2
Durability rating: 2
Dates made: 08/22/2014 - 09/11/2014
Total time: 4hrs 40mins
Total cost: $11.49
Whole view Side view
The whole image, and a side view

Top view Top view
Light and dark moons

Top view
How the magnet works, it just snaps into the hole


Project#96:
Hope's Boomerang "Airwing" (Final Fantasy XIII-2)
~~~ Project contains moving parts: The boomerang opens and closes via a peg at the end ~~~
This is the photo I used as a guide

Details ~n~ stuff
Size: 3 feet in length (open), 2 feet in length (closed)
Status: Completed
Degree of difficulty: 2
Durability rating: 2
Dates made: 06/02/2014 07/12/2014
Total time: 8hrs 50mins
Total cost: $24.84
Whole view
The whole boomerang, opened

Closed view
The whole boomerang, closed


Project#95:
Tsubaki Kusarigama form/half (Soul Eater)
This is the photo I used as a guide

Details ~n~ stuff
Size:1 foot 7 inches in length, 3 foot chain
Status: Completed
Degree of difficulty: 2
Durability rating: 1
Dates made: 04/20/2014 - 06/01/2014
Total time: 7hrs 0mins
Total cost: $14.78
Whole view
The whole scythe and chain

Close view
A close up of the scythe blade


Project#94:
Amethyst's Whip (Steven Universe)
This is the photo I used as a guide

Details ~n~ stuff
Size: 5 feet 9 inches in length (tip of rope to handle end)
Status: Completed
Degree of difficulty: 2
Durability rating: 1
Dates made: 04/25/2014 - 05/17/2014
Total time: 5hrs 0mins
Total cost: $16.55
Whole view
The whole whip

End view
A close up of the tips

Handle view Gem view
A close up of the handle and the gem at the end.


Project#85:
S.P.L.A.N.K.E.R. (Codename: Kids Next Door)
This is the image I used as a guide

Details ~n~ stuff
Size: 1 foot 1 inch
Status: Completed
Degree of difficulty: 2
Durability rating: 1
Dates made: 10/07/2013 - 10/13/2013
Total time: 2hrs 30mins
Total cost: $6.49
Whole view
The whole weapon. This was an odd one, I wasn't really planning on putting this on my page because I didn't put all of my effort into it. But I figured since it's something I'd made it should be up here. I didn't use any wood putty to cover holes or anything because I wanted it to still look like pieces of wood. I pretty much just hacked away at the smooth pieces to give them a chipped look, and the saw and such are only made out of poster board.


Project#79:
Igor Neuhaus' Compass (Ao No Exorcist)
~~~ Project contains moving parts: The compass opens and closes on a peg by the handle ~~~
This is the image I used as a guide
(This was the best image I could get. I worked with many others but they were nothing but tiny screenshots/etc)

Details ~n~ stuff
Size: 4 feet 2 inches in length
Status: Completed
Degree of difficulty: 3
Durability rating: 2
Dates made: 03/28/2013 - 06/10/2013
Total time: 22hrs 55mins
Total cost: $59.20
Whole view Whole view
The whole compass open + closed. It pivots on a joint at the center by the handle made of a piece of PVC pipe

End view
Closer view of the bottom since the whole images aren't good. The detail is a little bit improvised because images were scarce.

Handle view
A close up of the handle

Chalk view Point view
A close up of the chalk end and point/needle end

Project#76:
Teapot (Alice: Madness Returns)
(Pretty sure this project will always remain in this WTF category ^^; lol)
This is the image I used as a guide

Details ~n~ stuff
Size: 1 7 in height 1 9 in length (from the handle to the tip of the spout)
Status: Completed
Degree of difficulty: 5
Durability rating: 1 (because it's made of foam, no squish!)
Dates made: 02/06/2013 - 04/20/2013
Total time: 23hrs 45mins
Total cost: $39.91
Whole view
The whole teapot

Handle view Lid view
A close up of the handle and lid

Spout view
A close up of the teapot spout

Watch view
A close up of the watch face/center of teapot

Project#54:
Temari's Fan (Naruto)
~~~ Project contains moving parts: The fan opens and closes ~~~
~ Special thanks to Candice Hagman for making the cloth part of the fan and fixing it to the wood, as well as brainstorming and troubleshooting with the mechanics of it ~
http://buttonwho.deviantart.com/
http://www.etsy.com/shop/buttonwho
This is the photo I used as a guide

Details ~n~ stuff
Size: 4 feet in length
Status: Completed
Degree of difficulty: 3
Durability rating: 1
Dates made: 01/05/2011 - 07/01/2011
Total time: 13hrs 40mins
Total cost: $64.84
Whole view
The fan opened all the way

Whole view
The fan closed.

(It didn't come out exactly like I had pictured it.. scrapped a lot of slats inside and some other things. But hell it looks like the fan, good enough for the cosplay. But I think I will stay away from fans after this.. )


Project#51:
Ninja Shuriken (Naruto)
This is the photo I used as a guide

Details ~n~ stuff
Size: 3.5 inches in diameter
Status: Completed
Degree of difficulty: 2
Durability rating: 3
Dates made: 04/13/2010 - 04/16/2010
Total time: 4hrs 35mins
Total cost: $3.99
Whole view
The whole shuriken


Project#40:
Sailor Neptune's "Deep Submerge" Mirror (Sailor Moon)
This is the photo I used as a guide
~ I only had a few images of the mirror (manga version) and none of them were really clear (one was another cosplay, which I don't like to rely too heavily on because I don't know how accurate cosplays are) so my finished product may not look exactly like the original. ~

Details ~n~ stuff
Size: 1 foot 2 inches in length
Status: Completed
Degree of difficulty: 3
Durability rating: 1
Dates made: 01/27/09-(postponed) Picked up 09/02/2013 09/29/2013
Total time: 9hrs 25mins
Total cost: $12.16
Whole view
The whole mirror, I couldn't get such a good picture for some reason

Face view Handle view
Close ups of the mirror face and handle detail.


Project#36:
Rinoa's Weapon "Shooting Star" (Final Fantasy VIII)
This is the image I used as a guide

Details ~n~ stuff
Size: 1 foot 6 inches in diameter
Status: Completed
Degree of difficulty: 3
Durability rating: 3
Dates made: 09/08/08 - 09/12/08
Total time: 12hrs
Total cost: $15.43
Whole view
The whole weapon

Close view
A close up of the weapon

Project#35:
Selphie's Nunchaku "Crescent Wish" (Final Fantasy VIII)
This is the photo I used as a guide

Details ~n~ stuff
Size: 8 feet 6 inches in length (from end to end), Rods-2 feet 7 inches, Chain-3 feet 2 inches
Status: Completed
Degree of difficulty: 2
Durability rating: 3
Dates made: 08/13/08 - 08/20/08
Total time: 12hrs
Total cost: $18.88
Whole View
The Whole Nunchaku

Top View
The Ends of the Nunchaku

Project#12:
Meru's Hammer (Legend of Dragoon)
This is the photo I used as a guide

Details ~n~ stuff
Size: 3 feet 8 inches in height, 1 foot width of hammer head
Status: Completed
Degree of difficulty: 5
Durability rating: 3
Dates made: 01/24/08 - 03/06/08
Total time: - not recorded -
Total cost: $43.99
Whole view
Whole View

Close up of the head
A close up of the head

Handle attatch view Handle attach view2 Close up of the bottom
Close ups of the support parts and end



Back to Projects Page