Hand-held weapons Page
(hand held blades that don't fall into the knife category including sais, brass knuckles, claws etc)


Project#113:
Cheshire's Sais (Young Justice)
This is the image I used as a guide

Details ~n~ stuff
Size: 1 foot 7.5 inches in length
Status: Completed
Degree of difficulty: 2
Durability rating: 2
Dates made: 03/08/2017 - 04/03/2017
Total time: 5hrs 40mins
Total cost: $7.83
Whole view
Both sais

Grip view
A close up of the grip


Project#71:
Rikku's Claw (Final Fantasy X)
(Made for Otakon 2013)
This is the photo I used as a guide

Details ~n~ stuff
Size: 1 foot 4 inches in length
Status: Completed
Degree of difficulty: 3
Durability rating: 2
Dates made: 11/05/2012 - 12/02/2012
Total time: 12hrs 5mins
Total cost: $13.48
Whole View Whole View
The whole Claw (different angles)

Whole View Whole View
Being held + underside (covered in felt because it's going to sit on the arm)
I'm going to eventually glue on a piece of velcro or elastic at the very back to secure it around the arm
Whole View
A final edit of the claw. Added the little orange part at the end that I forgot the first time and also an adjustable velcro strap to secure it on the upper arm.


Project#60:
Asuma's Trench Knives (Naruto)
This is the image I used as a guide

Details ~n~ stuff
Size: 1 foot in length
Status: Completed (both)
Degree of difficulty: 1
Durability rating: 3
Dates made: 03/04/2012 - 03/13/2012
Total time: 5hrs 50mins
Total cost: $5.48
Whole view
The set of knives


Project#53:
Axel's Chakrams (Kingdom Hearts 2)
This is the image I used as a guide

Details ~n~ stuff
Size: 2 feet in diameter
Status: Completed
Degree of difficulty: 4
Durability rating: 3 (use caution with blade tips)
Dates made: 09/22/2010 - 10/05/2013
Total time: 59hrs (for both)
Total cost: $52.74 (for both)
The set
Both chakrams

Detail
A close up of the detail/carving


Project#49:
Ezio's Wrist Blades (Assassin's Creed II)
(Made for Otakon 2010)
~~~ Project contains moving parts: The blades slide in and out of the casings ~~~
This is the image I used as a guide

Details ~n~ stuff
Size: 1 foot 3 inches in length (extended) (8 inches in casing)
Status: Completed
Degree of difficulty: 3
Durability rating: 2
Dates made: 01/26/10 - 05/14/10
Total time: 13hrs 30mins
Total cost: $5.78 (for both)
Left Front View Left Extended View
Left blade, the case + extended

Left Blade Casing View
Left blade, close up of casing

Right Front View Right Extended View
Right blade, the case + extended

Right Mechanics View Right Blade view
Right blade (shows mechanics/slide) + close up of blade


Project#43:
Yuri's Claws "Nightbird's Claw" (Shadow Hearts)
This is the image I used as a guide

Details ~n~ stuff
Size: 5.5 inches in length
Status: Completed
Degree of difficulty: 2
Durability rating: 2
Dates made: 02/02/09 - 02/19/08
Total time: 9hrs 30mins
Total cost: $6.98 (for both)
Whole View
Both claws

Whole View
Claw in hand


Project#23:
Yuri's Claws "Chimera's Claw" (Shadow Hearts: Covenant)
(Made for Otakon 2008)
This is the image I used as a guide

Details ~n~ stuff
Size: 1 foot 3 inches in length
Status: Completed
Degree of difficulty: 3
Durability rating: 1
Dates made: 04/10/08 - 05/13/08
Total time: - not recorded -
Total cost: $28.71
Whole view
The whole claw

Grip view
A close up of the grip

Blade view
A close up of the blades

Dual view
Both claws together




Back to Projects Page